Yealink T29G Administrator's Guide

Getting Started
25
T48G
T46G
T42G/
T41P
T29G
T27P
T23P/T23G/T2
1(P) E2
Description
Recording box is
full
A call cannot be
recorded
Recording starts
successfully
Recording
cannot be
started
Recording
cannot be
stopped
VPN is enabled
/
/
/
Bluetooth mode
is on
/
/
/
Bluetooth
headset is both
paired and
connected
/
/
/
/
Conference
The default
contact icon
/
/
/
The default
caller photo
IP phones can be configured automatically through configuration files stored on a
central provisioning server, manually via the phone user interface or web user interface,
or by a combination of the automatic and manual methods.
The recommended method for configuring IP phones is automatically through a central
provisioning server. If a central provisioning server is not available, the manual method
will allow changes to most features.
The following sections describe how to configure IP phones using each method.
 Phone User Interface

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)