Yealink T29G Administrator's Guide

Configuring Basic Features
235
To configure Transfer on Conference Hang up via web user interface:
1. Click on Features->Transfer.
2. Select the desired value from the pull-down list of Transfer on Conference Hang up.
3. Click Confirm to accept the change.
Directed call pickup is used for picking up an incoming call on a specific extension. A
user can pick up the incoming call using a directed pickup key or the DPickup soft key.
This feature depends on support from a SIP server. For many SIP servers, directed call
pickup requires a directed pickup code, which can be configured on a phone or a
per-line basis.
Note
Procedure
Directed call pickup can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure the directed call
pickup code on a per-line basis.
Parameter:
account.X.direct_pickup_code
<y0000000000xx>.cfg
Configure directed call pickup
features on a phone basis.
Parameters:
features.pickup.direct_pickup_
enable
features.pickup.direct_pickup_c
ode
It is recommended not to configure the directed call pickup key and the DPickup soft key
simultaneously. If you do, the directed call pickup key will not be used correctly.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)