Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
234
For a conference call, all parties drop the call when the conference initiator drops the
conference call. For local conference, transfer on conference hang up allows the other
two parties to remain connected when the conference initiator drops the conference
call.
Procedure
Transfer on conference hang up can be configured using the configuration files or
locally.
Configuration File
<y0000000000xx>.cfg
Configure the transfer on
conference hang up.
Parameter:
transfer.tran_others_after_conf_e
nable
Local
Web User Interface
Configure the transfer on
conference hang up.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-transfer&q=load
Details of the Configuration Parameter:
Parameter & Description
Permitted Values
Default
transfer.tran_others_after_conf_enable
0 or 1
0
Description:
Enables or disables the IP phone to transfer the local conference call to the two
parties after the conference initiator drops the local conference call.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the other two parties remain connected when the
conference initiator drops the conference call.
Note: It is only applicable to the local conference.
Web User Interface:
Features->Transfer->Transfer on Conference Hang up
Phone User Interface:
None