Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
262
5. Select the desired line from the pull-down list of Line.
6. Click Confirm to accept the change.
To configure a call park key via phone user interface:
1. Press Menu->Features->DSS Keys.
2. Select the desired DSS key.
3. Press or , or the Switch soft key to select Key Event from the Type field.
4. Press or , or the Switch soft key to select Call Park from the Key Type field.
5. Press or , or the Switch soft key to select the desired line from the Account
ID field.
6. (Optional.) Enter the string that will appear on the LCD screen in the Label field.
7. Enter the desired value (e.g., call park feature code) in the Value field.
8. Press the Save soft key to accept the change.
Calling Line Identification Presentation (CLIP) allows IP phones to display the caller
identity, derived from a SIP header contained in the INVITE message when receiving an
incoming call. IP phones support deriving caller identity from three types of SIP header:
From, P-Asserted-Identity and Remote-Party-ID. Identity presentation is based on the
identity in the relevant SIP header.
If the caller already exists in the local directory, the local contact name assigned to the
caller should be preferentially displayed and stored in the call log.
For more information on calling line identification presentation, refer to
Calling and
Connected Line Identification Presentation on Yealink IP Phones
, available online:
http://www.yealink.com/DocumentDownload.aspx?CateId=142&flag=142.
Procedure
CLIP can be configured using the configuration files or locally.
To Next Page
Loading...
Need help?
General
