When X=9, the default value is 33 (Status).
When X=10, the default value is 0 (NA).
When X=14, the default value is 2 (Forward).
Web User Interface:
DSSKey->Line Key/ Programable Key->Type
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Type
To configure LDAP via web user interface:
1. Click on Directory->LDAP.
2. Enter the values in the corresponding fields.
3. Select the desired values from the corresponding pull-down lists.
4. Click Confirm to accept the change.
To configure an LDAP key via web user interface:
1. Click on DSSKey->Line Keys (or Programable Key).
2. In the desired DSS key field, select LDAP from the pull-down list of Type.
To Next Page
Loading...
