Yealink T29G

Configuring Basic Features
81
password as soon as possible.
Procedure
User password can be changed using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Change the user password of the
IP phone.
Parameter:
security.user_password
Local
Web User Interface
Change the user password of the
IP phone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=security&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
security.user_password
String within 32 characters
user
Description:
Configures the password of the user for web server access.
The IP phone uses “user” as the default user password.
The valid value format is username:new password.
Example:
security.user_password = user:123 means setting the password of user (current user
name is “user”) to password 123.
Note: IP phones support ASCII characters 32-126(0x20-0x7E) in passwords. You can
set the password to be empty via web user interface only.
Web User Interface:
Security->Password
Phone User Interface:
None
To change the user password via web user interface:
1. Click on Security->Password.
2. Select User from the pull-down list of User Type.
3. Enter new password in the New Password and Confirm Password fields.