Yealink T29G Administrator's Guide

Configuring Basic Features
79
Parameters
Permitted Values
Default
wui.https_enable
0 or 1
1
Description:
Enables or disables the user to access web user interface of the IP phone using
HTTPS protocol.
0-Disabled
1-Enabled
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTPS Status
network.port.https
Integer from 1 to 65535
443
Description:
Configures the HTTPS port for the user to access web user interface of the IP phone
using the HTTPS protocol.
Note: If you change this parameter, the IP phone will reboot to make the change take
effect.
Web User Interface:
Network->Advanced->Web Server->HTTPS Port (1~65535)
Phone User Interface:
Menu->Settings->Advanced Settings (default password: admin)
->Network->Webserver Type->HTTPS Port
To configure web server type via web user interface:
1. Click on Network->Advanced.
2. Select the desired value from the pull-down list of HTTP.
3. Enter the HTTP port number in the HTTP Port (1~65535) field.
The default HTTP port number is 80.
4. Select the desired value from the pull-down list of HTTPS.
5. Enter the HTTPS port number in the HTTPS Port (1~65535) field.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)