Configuring Basic Features
103
3. Select the desired value from the pull-down list of Date Format.
4. Click Confirm to accept the change.
To configure the NTP server and time zone via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->SNTP Settings.
2. Press or , or the Switch soft key to select the time zone that applies to your
area from the Time Zone field.
The default time zone is "+8".
3. Enter the domain names or IP addresses in the NTP Server1 and NTP Server2 fields
respectively.
4. Press or , or the Switch soft key to select the desired value from the
Daylight Saving field.
5. Press or , or the Switch soft key to select the desired value from the
Location field.
6. Press the Save soft key to accept the change.
To configure the time and date manually via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Manual Settings.
2. Enter the date in the Date field.
3. Enter the time in the Time field.
4. Press the Save soft key to accept the change.
To configure the time and date formats via phone user interface:
1. Press Menu->Settings->Basic Settings->Time & Date->Time & Date Format.
2. Press or , or the Switch soft key to select the desired time format from the
Time Format field.
To Next Page
Loading...
Need help?
General
