When adding a new language pack for the web user interface, the language pack must
be formatted as “Y.name.js” (Y starts from 12, “name” is replaced with the language
name). If the language name is the same as the existing one, the existing language file
will be overridden by the new uploaded one. We recommend that the name of the new
language file should not be the same as the existing languages.
To customize a language file:
1. Open the desired language template file (e.g., 1.English.js) using an ASCII editor.
2. Modify the characters within the double quotation marks on the right of the colon.
Don’t modify the translation item on the left of the colon.
The following shows a portion of the language pack “1.English.js” for the web user
interface (take SIP-T23G IP phones for example):
You can also customize the translation of the note language pack. The note information
is integrated in the icon of the web user interface. The note language pack must be
formatted as “Y.name_note.xml” (“Y” and “name” are associated with web language
pack).
To customize a note language file:
1. Open the desired note language template file (e.g., 1.English_note.xml) using an
ASCII editor.
2. Modify the text of the note field.
To Next Page
Loading...
