Yealink T29G - Page 140

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
126
Parameters
Permitted Values
Default
Phone User Interface:
None
custom_softkey_ring_back.url
URL within 511 characters
Blank
Description:
Configures the access URL of the custom file for the soft key presented on the LCD
screen when in the RingBack state.
Example:
The following example uses HTTP to download the RingBack state file from the
“XMLfiles” directory on provisioning server 10.2.8.16 using 8080 port.
custom_softkey_ring_back.url = http://10.2.8.16:8080/XMLfiles/RingBack.xml
Web User Interface:
None
Phone User Interface:
None
custom_softkey_talking.url
URL within 511 characters
Blank
Description:
Configures the access URL of the custom file for the soft key presented on the LCD
screen when in the Talking state.
Example:
The following example uses HTTP to download the Talking state file from the
“XMLfiles” directory on provisioning server 10.2.8.16 using 8080 port.
custom_softkey_talking.url = http://10.2.8.16:8080/XMLfiles/Talking.xml
Web User Interface:
None
Phone User Interface:
None
To configure softkey layout via web user interface:
1. Click on Settings->Softkey Layout.
2. Select the desired value from the pull-down list of Custom Softkey.
3. Select the desired state from the pull-down list of Call States.
4. Select the desired soft key from the Unselected Softkeys column and then
click .
The selected soft key appears in the Selected Softkeys column. If more than four