Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
128
Parameter:
features.key_tone
Local
Web User Interface
Configure a send key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Configure a send sound and key
tone.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-audio&q=load
Phone User Interface
Configure the send key.
Configure a key tone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
features.key_as_send
0, 1 or 2
1
Description:
Configures the "#" or "*" key as the send key.
0-Disabled
1-# key
2-* key
If it is set to 0 (Disabled), neither “#” nor “*” can be used as a send key.
If it is set to 1 (# key), the pound key is used as the send key.
If it is set to 2 (* key), the asterisk key is used as the send key.
Web User Interface:
Features->General Information->Key As Send
Phone User Interface:
Menu->Features->Key as send
features.key_tone
0 or 1
1
Description:
Enables or disables the IP phone to play a tone when a user presses a key on your
phone keypad.
0-Disabled