Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
150
LDAP. The search source list can be configured using a super search file. For more
information on how to customize a super search template, refer to Super Search
Template on page 516.
Procedure
Search source list in dialing can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Specify the access URL of the
super search file.
Parameter:
super_search.url
Local
Web User Interface
Configure the search source list in
dialing.
Navigate to:
http://<phoneIPAddress>/servlet
?p=contacts-favorite&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
super_search.url
URL within 511 characters
Blank
Description:
Configures the access URL of the super search template.
Web User Interface:
Directory->Setting->Search Source List In Dialing
Phone User Interface:
None
To configure search source list in dialing via web user interface:
1. Click on Directory->Setting.
2. In the Search Source List In Dialing block, select the desired list from the Disabled
column and then click .
The selected list appears in the Enabled column.
3. Repeat step 2 to add more lists to the Enabled column.
4. To remove a list from the Enabled column, select the desired list and then click .
5. To adjust the display order of search results, select the desired list and then click
or .