Yealink T29G

Configuring Basic Features
195
Procedure
180 ring workaround can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure 180 ring workaround.
Parameter:
phone_setting.is_deal180
Local
Web User Interface
Configur 180 ring workaround.
Navigate to:
http://<phoneIPAddress>/servlet
?p=features-general&q=load
Details of the Configuration Parameter:
Parameter
Permitted Values
Default
phone_setting.is_deal180
0 or 1
1
Description:
Enables or disables the IP phone to deal with the 180 SIP message received after the
183 SIP message.
0-Disabled
1-Enabled
If it is set to 1 (Enabled), the IP phone will resume and play the local ringback tone
upon a subsequent 180 message received.
Web User Interface:
Features->General Information->180 Ring Workaround
Phone User Interface:
None
To configure 180 ring workaround via web user interface:
1. Click on Features->General Information.