Yealink T29G Administrator's Guide

Configuring Basic Features
209
answer forward settings.
The call forward on code and call forward off code configured on IP phones are used to
activate/deactivate the server-side call forward feature. They may vary on different
servers.
IP phones support the redirected call information sent by the SIP server with Diversion
header, per draft-levy-sip-diversion-08, or History-info header, per RFC 4244. The
Diversion/History-info header is used to inform the IP phone of a call’s history. For
example, when a phone has been set to enable call forward, the Diversion/History-info
header allows the receiving phone to indicate who the call was from, and from which
phone number it was forwarded.
Forward International
Forward international allows users to forward an incoming call to an international
telephone number. This feature is enabled by default.
Procedure
Call forward can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure call forward in custom
mode.
Parameters:
account.X.always_fwd.enable
account.X.always_fwd.target
account.X.always_fwd.on_code
account.X.always_fwd.off_code
account.X.busy_fwd.enable
account.X.busy_fwd.target
account.X.busy_fwd.on_code
account.X.busy_fwd.off_code
account.X.timeout_fwd.enable
account.X.timeout_fwd.target
account.X.timeout_fwd.timeout
account.X.timeout_fwd.on_code
account.X.timeout_fwd.off_code
<y0000000000xx
>.cfg
Configure the call forward mode.
Parameter:
features.fwd_mode
Configure call forward in phone
mode.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)