Yealink T29G Administrator's Guide

Configuring Basic Features
229
Parameters
Permitted Values
Default
None
transfer.on_hook_trans_enable
0 or 1
1
Description:
Enables or disables the IP phone to complete the semi-attended/attended transfer
through on-hook besides pressing the Transfer/Tran soft key or TRAN/TRANSFER key.
0-Disabled
1-Enabled
Web User Interface:
Features->Transfer->Attend Transfer On Hook
Phone User Interface:
None
transfer.semi_attend_tran_enable
0 or 1
1
Description:
Enables or disables the transferee party’s phone not to prompt a missed call on the
LCD screen before displaying the caller ID when performing a semi-attended
transfer.
0-Disabled
1-Enabled
Web User Interface:
Features->Transfer->Semi-Attend Transfer
Phone User Interface:
None
To configure call transfer via web user interface:
1. Click on Features->Transfer.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)