Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
12
In addition to physical features introduced above, IP phones also support the following
key features when running the latest firmware:
 Phone Features
- Call Options: emergency call, call waiting, call hold, call mute, call forward,
call transfer, call pickup, conference.
- Basic Features: DND, phone lock, auto redial, live dialpad, dial plan, hotline,
caller identity, auto answer.
- Advanced Features: BLF, server redundancy, distinctive ring tones, remote
phone book, LDAP, 802.1X authentication.
 Codecs and Voice Features
- Wideband codec: G.722
- Narrowband codec: G.711, G.726, G.729, iLBC, G723 (not applicable to
SIP-T27P, SIP-T23P/G and SIP-T21(P) E2 IP phones)
- VAD, CNG, AEC, PLC, AJB, AGC
- Full-duplex speakerphone with AEC
 Network Features
- SIP v1 (RFC2543), v2 (RFC3261)
- NAT Traversal: STUN mode
- DTMF: INBAND, RFC2833, SIP INFO
- Proxy mode and peer-to-peer SIP link mode
- IP assignment: Static/DHCP/PPPoE (not applicable to SIP-T42G/T41P IP phones)
- VLAN assignment: LLDP/Static/DHCP/CDP
- Bridge mode for PC port
- HTTP/HTTPS server
- DNS client
- NAT/DHCP server
- IPv6 support
 Management
- FTP/TFTP/HTTP/PnP auto-provision
- Configuration: browser/phone/auto-provision
- Direct IP call without SIP proxy
- Dial number via SIP server
- Dial URL via SIP server
- TR-069
 Security
- HTTPS (server/client)