Yealink T29G

Configuring Basic Features
255
Procedure
Recall key can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Assign a recall key.
Parameter:
linekey.X.type/
programablekey.X.type
Local
Web User Interface
Assign a recall key.
Navigate to:
http://<phoneIPAddress>/servlet
?p=dsskey&q=load&model=0
Phone User Interface
Assign a recall key.
ReCall Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 549.
Parameter
Permitted Values
Default
linekey.X.type/
programablekey.X.type
7
Refer to the
following content
Description:
Configures a DSS key as a recall key on the IP phone.
The digit 7 stands for the key type ReCall.
For line keys:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T23P/G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programable keys:
X=1-10, 12-14 (for SIP-T48G/T46G)
X=1-10, 13 (for SIP-T42G/T41P)
X=1-14 (for SIP-T29G/T27P)
X=1-10, 14 (for SIP-T23P/T23G/T21(P) E2)
Example:
linekey.1.type = 7