Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
292
Procedure
Tones can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure the tones for the IP
phone.
Parameters:
voice.tone.country
voice.tone.dial
voice.tone.ring
voice.tone.busy
voice.tone.congestion
voice.tone.callwaiting
voice.tone.dialrecall
voice.tone.info
voice.tone.stutter
voice.tone.message
voice.tone.autoanswer
Local
Web User Interface
Configure the tones for the IP
phone.
Navigate to:
http://<phoneIPAddress>/servl
et?p=settings-tones&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
voice.tone.country
Refer to the following content
Custom
Description:
Configures the country tone for the IP phone.
Permitted Values:
Custom, Australia, Austria, Brazil, Belgium, Chile, China, Czech, Czech ETSI,
Denmark, Finland, France, Germany, Great Britain, Greece, Hungary, Lithuania,
India, Italy, Japan, Mexico, New Zealand, Netherlands, Norway, Portugal, Spain,
Switzerland, Sweden, Russia, United States.
Example:
voice.tone.country = Custom
Web User Interface: