Yealink T29G Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
296
Parameters
Permitted Values
Default
Description:
Customizes the tone when the IP phone receives a text message or voice message.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if the parameter “voice.tone.country” is set to Custom.
Web User Interface:
Settings->Tones->Message
Phone User Interface:
None
voice.tone.autoanswer
String
Blank
Description:
Customizes the warning tone for auto answer.
The value format is Freq/Duration. For more information on the value format, refer to
the parameter “voice.tone.dial”.
Note: It works only if the parameter “voice.tone.country” is set to Custom.
Web User Interface:
Settings->Tones->Auto Answer
Phone User Interface:
None
To configure tones via web user interface:
1. Click on Settings->Tones.
2. Select the desired type from the pull-down list of Select Country.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)