Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
304
Parameters
Permitted Values
Default
symbol in the filter stands for any character. The “%” symbol in the filter stands for
the entering string used as the prefix of the filter condition.
Example:
ldap.name_filter = (|(cn=%)(sn=%))
When the name prefix of the cn or sn of the contact record matches the search
criteria, the record will be displayed on the LCD screen.
Web User Interface:
Directory->LDAP->LDAP Name Filter
Phone User Interface:
None
ldap.number_filter
String within 99
characters
Blank
Description:
Configures the criteria for searching the LDAP contact number attributes. The “*”
symbol in the filter stands for any character. The “%” symbol in the filter stands for
the entering string used as the prefix of the filter condition.
Example:
ldap.number_filter = (|(telephoneNumber=%)(mobile=%)(ipPhone=%))
When the number prefix of the telephoneNumber, mobile or ipPhone of the contact
record matches the search criteria, the record will be displayed on the LCD screen.
Web User Interface:
Directory->LDAP->LDAP Number Filter
Phone User Interface:
None
ldap.tls_mode
Integer from 0 to
2
0
Description:
Configures the connection mode between the LDAP server and the IP phone.
0-LDAP—Unencrypted connection between LDAP server and the IP phone. (port 389
is used by default).
1-LDAP TLS Start—TLS/SSL connection between LDAP server and the IP phone (port
389 is used by default).
2-LDAPs—TLS/SSL connection between LDAP server and the IP phone (port 636 is
used by default).
Web User Interface: