Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
334
Parameters
Permitted Values
Default
1-Enabled
X ranges from 1 to 16 (for SIP-T48G/T46G/T29G).
X ranges from 1 to 12 (for SIP-T42G).
X ranges from 1 to 6 (for SIP-T41P/T27P).
X ranges from 1 to 3 (for SIP-T23P/G).
X ranges from 1 to 2 (for SIP-T21(P) E2).
Web User Interface:
None
Phone User Interface:
None
ACD Key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 549.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
linekey.X.type
42
Refer to the following
content
Description:
Configures a line key to be an ACD key on the IP phone.
The digit 42 stands for the key type ACD.
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T23P/G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
Example:
linekey.2.type = 42
Default:
For SIP-T48G IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-29
is 0.