Yealink T29G - Page 360

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
346
Parameters
Permitted Values
Default
linekey.1.value = 224.5.5.6:10008
Note: The valid multicast IP addresses range from 224.0.0.0 to 239.255.255.255.
Web User Interface:
DSSKey->Line Key->Value
Phone User Interface:
Menu->Features->DSS Keys->Line Key X->Value
Paging List key
For more information on how to configure the DSS Key, refer to Appendix D: Configuring
DSS Key on page 549.
Parameters
Permitted Values
Default
linekey.X.type/programablekey.X.type
66
Refer to the following
content
Description:
Configures a DSS key as a paging list key on the IP phone.
The digit 66 stands for the key type Paging List.
For line keys:
X ranges from 1 to 29 (for SIP-T48G)
X ranges from 1 to 27 (for SIP-T46G/T29G)
X ranges from 1 to 15 (for SIP-T42G/T41P)
X ranges from 1 to 21 (for SIP-T27P)
X ranges from 1 to 3 (for SIP-T23P/G)
X ranges from 1 to 2 (for SIP-T21(P) E2)
For programable keys:
X=1-10, 12-14 (for SIP-T48G/T46G)
X=1-10, 13 (for SIP-T42G/T41P)
X=1-14 (for SIP-T29G/T27P)
X=1-10, 14 (for SIP-T23P/T23G/T21(P) E2)
Example:
linekey.1.type = 66
Default:
For SIP-T48G IP phones:
The default value of the line key 1-16 is 15, and the default value of the line key 17-29
is 0.