Yealink T29G Administrator's Guide

Configuring Advanced Features
409
TLV Type
TLV Name
Description
Inventory.
Network Policy
Port VLAN ID, application type, L2 priority
and DSCP value.
Extended
Power-via-MDI
Power type, source, priority and value.
Inventory –
Hardware Revision
Hardware revision of the IP phone.
Inventory –
Firmware Revision
Firmware revision of the IP phone.
Inventory –
Software Revision
Software revision of the IP phone.
Inventory – Serial
Number
Serial number of the IP phone.
Inventory –
Manufacturer Name
Manufacturer name of the IP phone.
The default value is “yealink”.
Inventory – Model
Name
Model name of the IP phone.
Asset ID
Assertion identifier of the IP phone.
Procedure
LLDP can be configured using the configuration files or locally.
Configuration File
<y0000000000xx>.cfg
Configure LLDP.
Parameters:
network.lldp.enable
network.lldp.packet_interval
Local
Web User Interface
Configure LLDP.
Navigate to:
http://<phoneIPAddress>/servle
t?p=network-adv&q=load
Phone User Interface
Configure LLDP feature.

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)