Yealink T29G - Page 449

Configuring Advanced Features
435
Parameters
Permitted
Values
Default
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_round_trip_delay.enable
0 or 1
0
Description:
Enables or disables the phone to display RoundTripDelay on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->RoundTripDelay
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_moslq.enable
0 or 1
1
Description:
Enables or disables the phone to display MOS-LQ on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface:
Settings->Voice Monitoring->Report options on phone UI->MOS-LQ
Phone User Interface:
None
phone_setting.vq_rtcpxr_display_moscq.enable
0 or 1
1
Description:
Enables or disables the phone to display MOS-CQ on the LCD screen.
0-Disabled
1-Enabled
Note: It works only if the parameter
“phone_setting.vq_rtcpxr.states_show_on_gui.enable” is set to “1”.
Web User Interface: