Yealink T29G Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
32
provisioning server on the DHCP server, an alternate method of automatically
discovering the provisioning server address is required. Connecting to the secondary
DHCP server that responds to DHCP INFORM queries with a requested provisioning
server address is one possibility. For more information, refer to
http://www.ietf.org/rfc/rfc3925.txt?number=3925.
Procedure
DHCP can be configured using the configuration files or locally.
Configuration File
<MAC>.cfg
Configure DHCP on the IP phone.
Parameter:
network.internet_port.type
Configure static DNS address
when DHCP is used.
Parameters:
network.primary_dns
network.secondary_dns
<y0000000000xx>.cfg
Configure the IP phone to use
manually configured static IPv4
DNS.
Parameters:
network.static_dns_enable
Local
Web User Interface
Configure DHCP on the IP phone.
Configure static DNS address
when DHCP is used.
Navigate to:
http://<phoneIPAddress>/servlet
?p=network&q=load
Phone User Interface
Configure DHCP on the IP phone.
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.internet_port.type
0, 1 or 2
0
Description:
Configures the Internet (WAN) port type for IPv4 when the IP address mode is
configured as IPv4 or IPv4 & IPv6.
0-DHCP

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)