Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
484
Parameters
Permitted Values
Default
account.1.ptime = 20
Web User Interface:
Account->Advanced->PTime (ms)
Phone User Interface:
None
To configure the codecs to use and adjust the priority of the enabled codecs on a
per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Codec.
4. Select the desired codec from the Disable Codecs column and then click .
The selected codec appears in the Enable Codecs column.
5. Repeat the step 4 to add more codecs to the Enable Codecs column.
6. To remove the codec from the Enable Codecs column, select the desired codec
and then click .
7. To adjust the priority of codecs, select the desired codec and then click
or .
8. Click Confirm to accept the change.
To configure the ptime on a per-line basis via web user interface:
1. Click on Account.
2. Select the desired account from the pull-down list of Account.
3. Click on Advanced.