Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
518
You can add contacts one by one on the IP phone directly. You can also add multiple
contacts at a time and/or share contacts between IP phones using the local contact
template file. After setup, place the template file to the provisioning server and specify
the access URL of the template file in the configuration files.
When editing a local contact template, learn the following:
 <root_contact> indicates the start of a contact list and </root_contact> indicates
the end of a contact list.
 <root_group> indicates the start of a group list and </root_group> indicates the
end of a group list.
 When specifying a ring tone for a contact or a group, the format of the value must
be Auto, Resource:Silent.wav, Resource:Splash.wav or Resource:RingN.wav
(system ring tone, integer N ranges from 1 to 8) or Custom:Name.wav (custom ring
tone).
 When specifying a desired line for a contact, valid values are -1~15. Multiple line
IDs are separated by commas.
The following table lists valid values for each phone model.
Phone Model
Values
Description
SIP-T48G/T46G/T29G
-1~15
-1 stands for Auto (the first
registered line)
0~15 stand for line1~line16
SIP-T42G
-1~11
-1 stands for Auto (the first
registered line)
0~11 stand for line1~line12
SIP-T41P/T27P
-1~5
-1 stands for Auto (the first
registered line)
0~5 stand for line1~line6
SIP-T23P/G
-1~2
-1 stands for Auto (the first
registered line)
0~2 stand for line1~line3
SIP-T21(P) E2
-1~1
-1 stands for Auto (the first
registered line)
0~1 stand for line1~line2
 When specifying an avatar for a contact, valid values are Default: avatar name
(the built-in avatar) and Config: avatar name (the custom avatar). It is only
applicable to SIP-T48G, SIP-T46G and SIP-T29G IP phones.
 At most 48 groups can be added to the IP phone.
 At most 1000 local contacts can be added to the IP phone.