Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
532
6. Select the desired limit mode from the pull-down list of Append Limit Mode.
7. Click Confirm to accept the change.
A dialog box pops up to prompt “Do you want to restart your machine?”. The
configuration will take effect after a reboot.
8. Click OK to reboot the phone.
The system log will be exported successfully to the desired FTP/TFTP server after a
reboot.
9. Reproduce the issue.
The following figure shows a portion of a <mac>-boot.log (e.g.,
0015654146dd-boot.log):
To Next Page
Loading...
