Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
46
network.pc_port.speed_duplex
Local
Web User Interface
Configure the transmission methods
of Ethernet ports.
Navigate to:
http://<phoneIPAddress>/servlet?p=
network-adv&q=load
Details of Configuration Parameters:
Parameters
Permitted Values
Default
network.internet_port.speed_duplex
0, 1, 2, 3, 4 or 5
0
Description:
Configures the transmission method and speed of the Internet (WAN) port.
0-Auto Negotiate
1-Full Duplex, 10Mbps
2-Full Duplex, 100Mbps
3-Half Duplex, 10Mbps
4-Half Duplex, 100Mbps
5-Full Duplex, 1000Mbps (only applicable to SIP-T48G/T46G/T42G/T29G/T23G IP
phones)
Note: We recommend that you do not change this parameter. If you change this
parameter, the IP phone will reboot to make the change take effect.
Web User Interface:
Network->Advanced->Port Link->WAN Port Link
Note: For SIP-T29G and SIP-T23G IP phones, 1000Mbps cannot be configured via web
user interface.
Phone User Interface:
None
network.pc_port.speed_duplex
0, 1, 2, 3 ,4 or 5
0
Description:
Configures the transmission method and speed of the PC (LAN) port.
0-Auto Negotiate
1-Full Duplex, 10Mbps
2-Full Duplex, 100Mbps
3-Half Duplex, 10Mbps