Yealink T29G

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
52
Details of Configuration Parameters:
Parameters
Permitted Values
Default
auto_provision.power_on
0 or 1
1
Description:
Enables or disables the IP phone to perform an auto provisioning process when
powered on.
0-Disabled
1-Enabled
Web User Interface:
Settings->Auto Provision->Power On
Phone User Interface:
None
auto_provision.repeat.enable
0 or 1
0
Description:
Enables or disables the IP phone to perform an auto provisioning process
repeatedly.
0-Disabled
1-Enabled
Web User Interface:
Settings->Auto Provision->Repeatedly
Phone User Interface:
None
auto_provision.repeat.minutes
Integer from 1 to 43200
1440
Description:
Configures the interval (in minutes) for the IP phone to perform an auto provisioning
process repeatedly.
Note: It works only if the parameter “auto_provision.repeat.enable” is set to
1(Enabled).
Web User Interface:
Settings->Auto Provision->Interval (Minutes)
Phone User Interface:
None