Yealink T29G Administrator's Guide

Administrator’s Guide for SIP-T2_Series_T4_Series IP Phones
76
Details of Configuration Parameters:
Parameters
Permitted Values
Default
phone_setting.contact_photo_display.enable
0 or 1
1
Description:
Enables or disables the IP phone to display contact avatar when it receives an
incoming call, dials an outgoing call or engages in a call.
0-Disabled
1-Enabled
Note: It is only applicable to SIP-T48G/T46G/T29G IP phones.
Web User Interface:
Settings->Call Display->Display Contact Photo
Phone User Interface:
None
phone_setting.called_party_info_display.enable
0 or 1
0
Description:
Enables or disables the IP phone to display the called account information when
receiving an incoming call.
0-Disabled
1-Enabled
Web User Interface:
Settings->Call Display->Display Called Party Information
Phone User Interface:
None
phone_setting.call_info_display_method
Integer from 0 to 4
0
Description:
Specifies the call information display method when the IP phone receives an
incoming call, dials an outgoing call or engages in a call.
0-Name+Number
1-Number+Name
2-Name
3-Number
4-Full Contact Info (display name<sip:xxx@domain.com>)
Web User Interface:

Yealink T29G Specifications

General

VoIP Protocols	SIP
PoE Support	Yes (IEEE 802.3af)
Headset Port	RJ9
Bluetooth	No
Weight	1.04 kg
Display	4.3" color display with backlight, 480 x 272 pixels
Line Keys	10 line keys
Ethernet Ports	2 x 10/100/1000 Mbps
Audio Codecs	G.722, G.711, G.729, G.726, iLBC
USB Port	1 x USB 2.0
Expansion Module Support	Yes, supports up to 6 EXP20 expansion modules
EHS	Yes
Supported Protocols	SIP
Operating Temperature	-10~50°C
Humidity	10% to 95% (non-condensing)