Using the VC110 Video Conferencing Endpoint
109
When you start recording, the display device will show and the recording time. When you
stop recording, the recording icon disappears from the screen. The display device prompts
“Successfully video recording!”
Note
To view recorded video via the remote control:
Insert the USB flash drive with the recorded video to the VC110 all-in-one unit.
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Record menu.
3. Press or to scroll to Videos, and then press .
4. Press or to select the desired Video.
5. Press or (Play soft key).
You can do the following:
- To pause the video, press (Pause soft key). The (Play soft key) appears
on the LCD TV screen.
Press (Play soft key) to continue playing video.
- To skip forward the video, press . Press once to skip forward 8 seconds.
- To rewind the video, press . Press once to rewind 8 seconds.
- To adjust the volume of the speakerphone, press or .
- To stop the video, press (Stop soft key).
When receiving an incoming call while you are playing video, the endpoint will stop playing
video automatically.
To delete recorded video via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to select the Record menu.
3. Press or to scroll to Videos, and then press .
4. Press or to select the desired video.
5. Press (Delete soft key).
If you start recording during a call, both your display device and remote display devices
will show the icon on your video image.
To Next Page
Loading...
