User Guide for Yealink VC110 Video Conferencing Endpoint
110
The display device prompts “Delete this video?”
6. Select OK, and then press to delete the video.
Auto Recording
Auto recording feature is available only when the recording feature is enabled. If it is enabled,
the endpoint will start recording automatically once a call is established. Make sure a USB flash
drive has been inserted to the USB port on the VC110 all-in-one unit and the USB feature is
enabled. You can configure auto recording feature via web user interface only.
To configure auto recording feature via web user interface:
1. Click on Setting->Video & Audio.
To Next Page
Loading...
