User Guide for Yealink VC110 Video Conferencing Endpoint
154
interface.
To reset the endpoint via the remote control:
1. Press (Menu soft key) to enter main menu.
2. Press or to scroll to the Advanced menu.
3. Enter admin password (default password: 0000) in the Admin Password field.
4. Press or Press (Enter soft key).
5. Press or to scroll to Reboot & Reset, and then press .
6. Press or to scroll to Reset, and then press .
The display device prompts “Reset to Factory? ”
7. Select OK, and then press .
The endpoint reboots automatically, the LCD screen of the video conferencing phone prompts
“Rebooting Please wait…”. The phone will be reset to factory sucessfully after startup.
Note
Resetting the endpoint is configurable via the web user interface at the path
Setting->Upgrade->Reset to Factory.
Reset of the endpoint may take a few minutes. Do not power off until the phone starts up
successfully.
To Next Page
Loading...
