11-8
IM CA150E
Safety standards:
EN 61010-1, EN 61010-2-030
Measurement category O (Other)
Indoor use, altitude 2000 m or less,
pollution degree 2
Power supply: Optional electrical supply (AC Adapter)
12V DC, 20W max.
UL61010-1
CAN/CSA C22.2 No.61010-1
EMC standards: EN 61326-1 Class B,
EN 61000-3-2, EN 61000-3-3, EN 55011 Class B, Group 1
EMC Regulatory Arrangement in Australia and New Zealand
EN 55011 Class B, Group 1
Korea Electromagnetic Conformity Standard
( )
Measurement error may temporarily occur under immunity environments.
Conditions of EMC:
Use an AC adapter (94010), an RJ sensor, RS232 cable
(Shielded cable, less than 30 m) and the included lead cable.
For the lead cable, wind a designated ferrite core (A1193MN)
two turns toward the main body of the instrument.
For details on ferrite core, refer to “Appendix 3.”
Measurement error may temporarily occur under immunity
environments.
Environmental standard: EN 50581
Monitoring and control instruments including
industrial monitoring and control instruments
11. Specications
To Next Page
Loading...
Need help?
General
