YOKOGAWA FLXA402T - Page 37

<4. Setting converter>
4-4
IM 12A01G01-03EN 1st Edition : Mar. 25, 2021-00
Table 4.1 “Setting” menu
Parameters Ref. section
mA input
settings (Ad)
4.1
Type 4.1.1
Damping time 4.1.2
AI upper limit 4.1.3
AI lower limit
Temperature 4.1.4
pH
Conductivity
Contact Input
settings
4.2
Contact input1
Contact input Type 4.2.1
DI1 contact input Range2 select 4.2.2
Contact input2 (Ad)
mA output
settings
4.3
mA1 ―
mA1 ―
mA1 (output) 4.3.1
Process parameter slot
Process parameter
Output line form
Range1 0%
Range1 100%
Range 1 changeover %
Range1 changeover point value
Burn
Damping time
mA1 Range Setting
Range select setting
Manual range select
Range2 0%
Range2 100%
Range3 0%
Range3 100%
Changeover point of auto range
mA1 (simulate) 4.3.2
Simulation %
mA1 (Congure Hold) 4.3.3
Last or Fixed
Fixed value mA
Auto hold during maintenance
mA2 ―
mA3 (Ad) ―
mA4 (Ad) ―
mA output limit setting 4.3.4
mA Output upper limit
mA Output lower limit