IM 04P01B01-01E
7-22
7.14 Changing the Display/Printout Language
This section explains the details of changing the display/printout language.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
Changing the Settings
1.
Hold down the
key for 3 seconds to enter Setting mode.
2.
Hold down the and keys simultaneously for 3 seconds to enter Basic
Setting mode.
3.
Press the key or SHIFT + key to select Language and then press the
key.
4.
Set each item and press the key.
Use the
key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
To correct the setting, press the
key.
If you are done, press the ESC key.
Select the display/printout language.
The new setting takes effect.
ESC/?
Language
Setting complete
Basic=Language
Lang=English
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT + key to select End and then press the key. Press
the
key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the
key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Explanation
Lang (Language)
English (E):
Uses the English alphabet, numbers, and symbols for display and printout.
German (G)*:
Uses the German alphabet, numbers, and symbols for display and printout.
French (F)*:
Uses the French alphabet, numbers, and symbols for display and printout.
Japanese (J): Uses the English alphabet, katakana, numbers, and symbols for display
and printout.
*: German and French are supported on version 1.21 or later. The setup items of the
customized menu and header printout (/BT1 option) are displayed in English.
To Next Page
Loading...
Need help?
General
