IM 04P01B01-01E
5-12
5.3 Setting the Unit on Scaled Channels
Units are set on channels whose input range is set to Scaling, 1-5V, or SQRT.
Procedure
1.
Hold down the
key for 3 seconds to enter Setting mode.
2.
Press the key or SHIFT + key to select Unit and then press the key.
3.
Set each item and press the key.
Use the
key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
4.
When the Setting complete screen appears, do either of the following:
Press the
key to set other channels.
If you are done, press the ESC key.
5.
Hold down the
key for 3 seconds to return to Operation mode.
Set the unit.
Set the channel range.
The new setting takes effect.
First channel Last channel
ESC/?
CH=01-01
Unit=
01-01 Channel
Explanation
Characters That Can Be Used for Units
A unit is set using up to six characters.
The available characters are as follows:
Alphabet,numbers,symbols(%,#,°,@,+,–,*,/,(,),µ,Ω,
2
,
3
, .), and space
<Related Topics> Enteringtheunitstring:Page25intheμR10000RecorderOperation
Guide
To Next Page
Loading...
Need help?
General
