YOKOGAWA MuR10000 User Manual

IM 04P01B01-01E
7-16
7.10 Setting the Key Lock Function
This section explains the details of setting the keys that can be locked and the password
for releasing the key lock.
Basic Setting mode cannot be entered when recording is in progress or when
computation is in progress on models with the computation function (/M1 option).
Procedure
Changing the Settings
1.
Hold down the
MENU
key for 3 seconds to enter Setting mode.
2.
Hold down the and keys simultaneously for 3 seconds to enter Basic
Setting mode.
3.
Press the key or SHIFT + key to select Keylock and then press the
key.
4.
Set each item and press the key.
Use the
key or SHIFT + key to select values.
For the procedure on how to enter values or characters, see section 4.2.
If you press the ESC key in the middle of the operation, the settings entered up to
then are cancelled, and the display returns to a higher level menu.
5.
When the Setting complete screen appears, do either of the following:
To correct the setting, press the
key.
If you are done, press the ESC key.
Set the password for releasing the key
lock.
Select whether to use the key lock
function.
Select Lock to apply the key lock function
to the RCD key.
Select Lock to apply the key lock function
to the FEED key.
Select Lock to apply the key lock function
to the MENU key.
Basic=Keylock
Keylock=Use
Password=
RCD=Free
Feed=Free
Menu=Free
(Displays the following when the
Keylock is set to Use)
To the next page

YOKOGAWA MuR10000 Specifications

General

Brand	YOKOGAWA
Model	MuR10000
Category	Measuring Instruments
Language	English