IM 04P01B01-01E
7-34
Select set menu
The new setting takes effect.
(/BT1 option)
(/BT1 option)
Batch name=On
Select whether to display Batch No. and
Lot No. in Setting mode. Select On or Off.
Batch detail=On
Select whether to display Batch detail in
Setting mode. Select On or Off.
ESC/?
Calibration=On
Select whether to display Calibration in
Setting mode. Select On or Off.
Math=On
Select whether to display Math in Setting
mode. Select On or Off.
(/M1 option)
(/CC1 option)
Applying the Changes and Returning to Operation Mode
Press the key or SHIFT + key to select End and then press the key. Press
the
key to select Store and then press the key. The changes are applied, and
the screen returns to Operation mode. If you select Abort and press the
key, the
changes are discarded, and the screen returns to Operation mode. Press the ESC key to
return to the Basic= screen.
Explanation
On: Display the menu in Setting mode.
Off: Do not display the menu in Setting mode when Customized Menu is enabled.
<Related Topics> Enabling the Customized Menu: Section 7.22
7.21 Selecting to Show/Hide Setting Mode Menus
To Next Page
Loading...
Need help?
General
