6 - 10 TC51 User Guide
Inserting a TC51 with Rugged Boot into Cradle
Each cradle cup has an insert that must be removed prior to inserting the TC51 with Rugged Boot. Remove the
insert and then insert the TC51 into the cup.
Figure 6-7 Remove Insert from Cup
Battery Charging
Main Battery Charging
The device’s Charging/Notification LED indicates the status of the battery charging in the device. See Table 1-3 on
page 1-8 for device charging status. The 4,300 mAh (typical) / 4,050 mAh (minimum) battery charges from fully
depleted to 90% in approximately 2.5 hours and from fully depleted to 100% in approximately three hours.
Spare Battery Charging
The Spare battery Charging LED on the cup indicates the status of the spare battery charging. The 4,300 mAh
(typical) / 4,050 mAh (minimum) battery charges from fully depleted to 90% in approximately 2.3 hours and from
fully depleted to 100% in approximately three hours.
See the TC51 Touch Computer Integrator Guide
for Android Version 6.0.1 for information on
installing the 4-Slot Battery Charger onto the cradle.
NOTE In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for
approximately 14 hours of use.
To achieve the best fast charging results use only Zebra charging accessories and batteries. Charge
batteries at room temperature with the TC51 in sleep mode.
NOTE In many cases the 90% charge provides plenty of charge for daily use. A full 100% charge lasts for
approximately 14 hours of use.
To achieve the best fast charging results use only Zebra charging accessories and batteries.
To Next Page
Loading...