Zebra TC51 - Disconnect from the Host Computer

Using the TC51 2 - 25
Figure 2-21 Use USB Dialog Box
3. Touch Photo transfer (PTP).
4. On the host computer, open a file explorer application.
5. Open the SD card or the Internal storage folder.
6. Copy or delete photos as required.
Disconnect from the Host Computer
1. On the host computer, unmount the device.
2. Remove the USB Charging cable from the device or remove the device from the cradle.
CAUTION Carefully follow the host computer’s instructions to unmount the microSD card and disconnect USB
devices correctly to avoid losing information.