Getting Started 1 - 11
Figure 1-13 Replace Access Door
11. Insert the battery, bottom first, into the battery compartment in the back of the TC51.
12. Press the battery down until the battery release latches snap into place.
13. Replace the hand strap, if required.
14. Press and hold the Power button to turn on the TC51.
Accessing Device Settings
Throughout this guide, the user can access device:
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. On the Home screen, touch > .
Battery Management
To check the charge status of the main battery, open Settings and touch About phone > Battery Information.
Battery status indicates that the battery is discharging and Battery level lists the battery charge (as a percentage
of fully charged). The battery percentage can also be viewed next to the battery icon in the quick access panel.
Swipe down with two fingers from the status bar to open the quick access panel.
Monitor Battery Usage
The Battery screen lists which applications consume the most battery power. Also use it to turn off applications
that were downloaded if they are consuming too much power.
1. Swipe down with two fingers from the status bar to open the quick access panel and then touch .
2. Touch Battery.
NOTE Prior to checking the battery charge level, remove the TC51 from any AC power source (cradle or cable).
To Next Page
Loading...
Need help?
General
Weight and Dimensions
