EasyManua.ls Logo

Zebra TC51 - Photo Settings; Video Settings

Zebra TC51
206 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Applications 3 - 13
Photo Settings
When in Photo mode, photo settings are displayed on screen. Touch to display the photo settings options.
•Flash - Touch to set whether the camera relies on its light meter to decide whether a flash is necessary, or to
turn it on or off for all shots.
Off - Disable flash.
Auto - Camera adjusts flash automatically depending upon light meter (default).
On - Enable flash upon taking a photo.
Torch - Turn flash on continuously.
Picture size - Touch to set the size (in pixels) of the photo. Options: 13M pixels (default), 8M pixels, 5M
pixels, 3M pixels, HD 1080, 2M pixels, HD 720, 1M pixels, WVGA, VGA, or QVGA.
Picture quality - Touch to select picture quality setting. Options: Low, Standard (default) or High.
Countdown timer - Options: Off (default), 2 seconds, 5 seconds or 10 seconds.
•Storage – Touch to select location to store the photo. Options: Phone or SD Card.
Face Detection - Select to enable face detection. Options: Off (default) or On.
•ISO - Set how sensitive the camera is to light. Options: Auto (default), ISO Auto (HJR), ISO100, ISO200,
ISO400, ISO800 or ISO1600.
Exposure - Touch to adjust the exposure settings. Options: +2, +1
, 0(default), -1 or -2.
White balance - Touch to select how Camera adjusts colors in different kinds of light, to achieve the most
natural-looking colors.
Incandescent - Adjust the white balance for incandescent lighting.
Fluorescent - Adjust the white balance for florescent lighting.
Auto - Adjust the white balance automatically (default).
Daylight - Adjust the white balance for daylight.
Cloudy - Adjust the white balance for a cloudy environment.
Focus mode - Touch to select the camera focus setting. Options: Auto, Infinity, Macro or CAF (Continuous
Auto Focus) (default).
•ZSL - Set the camera to immediately take a picture when the button is pressed (default – enabled)
Video Settings
When in Video mode, video settings are displayed on screen. Touch to display the video settings options.
•Flash - Touch to set whether Rear-facing Camera relies on its light meter to decide whether a flash is
necessary, or to turn it on or off for all shots.
Off - Disable flash (default).
Torch - Turn flash on continuously.
Video quality - Touch to select video quality. Options: HD 1080p (default), HD 720p, or SD 480p.
Video duration - Options: 30 seconds (MMS) or 30 minutes (default).
•Storage – Touch to select location to store the photo. Options: Phone (default) or SD Card.

Table of Contents

Other manuals for Zebra TC51

Related product manuals