77
Printer Configuration and Adjustment
Changing Printer Settings
8/23/12 P1051584-002
Print Width Specify the width of the labels being used.
Note • Setting the width too narrow can result in portions of a label format not being
printed on the media. Setting the width too wide wastes formatting memory and can
cause the printer to print off of the label and onto the platen roller. This setting can
affect the horizontal position of the label format if the image was inverted using the
^POI ZPL
II command.
Accepted values:
minimum: 2 dots
maximum:
• ZE500-4 203 dpi: 832 dots
• ZE500-4 300 dpi: 1228 dots
• ZE500-6 203 dpi: 1344 dots
• ZE500-6 300 dpi: 1984 dots
Related ZPL command(s):
^PW
SGD command used:
none
Control panel menu item: PRINT WIDTH on page 23
Printer web page:
View and Modify Printer Settings > Media Setup >
Print
Width
Table 5 • Print Settings (Continued)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
