- Service 08 is supported when [05. Test or Component Control] is selected.
- Service 09 is available under [06. Vehicle Information] menu, and PID 08 of Service
09 that is reading “In-use performance tracking of spark ignition vehicles” data is
supported under [07. In-use Performance Tracking] menu separately.
Typical OBD2 menu for a non-CAN type vehicle
OBD-II / EOBD Current Data
As explained above, when [1. Readiness Test] and [2. Current Data] are selected from
the OBD-II menu, Current data that is equivalent to OBD2 Service 01 is displayed as
shown below:
Readiness Test
To Next Page
Loading...