Name: ZOLL E Series
Brand: ZOLL
Rating: 4 (1 reviews)

To Next Page

To Previous Page

E Series Operator’s Guide

1-14 9650-1210-01 Rev. R

Restarting the Device

Certain events require the E Series products to be

restarted after they shut off or become inoperative.

One example is when the battery runs down and the unit

shuts off. In this case, perform these steps in this order:

1. Turn the selector switch to the OFF position

2. Remove the battery.

3. Insert a new battery.

4. Turn the selector switch to the desired operating

mode to resume operation.

This sequence is necessary to restart the device, and

can also be used to clear some X FAULT XX messages,

when immediate use of the device is required.

Note that some settings (for example, alarm settings,

lead selection, ECG size) may need to be restored from

their default values when operation is resumed.

Questions and Answers:

Need help?

Do you have a question about the ZOLL E Series and is the answer not in the manual?

ZOLL E Series Specifications

General