Rear
Panel
(1
)
AC
adaptor terminal
For connection of the included
AD0002
AC adaptor.
(2)
REMOTE IN termlnal
For connection with a controller equipped with a
ZOOM
remote out terminal, such
as
the optional 8050 Advanced
Foot Controller.
(3)
MlDI terminals
For connection to other
MlDI
devices, such
as
a synthesizer
or to a computer
(via
MIDI
interface). These are used for
remotely controlling the 9030 from a synthesizer, or for stor-
ing
data
of the 9030 to a computer.
(4)
OUTPUT terminals
For connection
to
an
amplifier/speaker system, mixer, etc.
The method of output changes depending on the output mode
(
See page
44
)selected.
(5)
EXTERNAL SENDlRETURN terminal
For connection of an external effect device. The 9030
can
memorize the setting of the signal level sent to the connected
external effect,
as
well
as
the ONIOFF status of the effect.
(6)
INPUT terminal
For connection of musical instruments with relatively low
output impedance, such
as
a synthesizer or rhythm machine.
This terminal cannot
be
used simultaneously with the Hi-Z
INPUT
terminal on the front panel. When
both
terminals are
connected, the Hi-Z
INPUT
terminal has priority.
Rear
Panel
r
OUTPUT1
r
EXTERNAL
-I
R
L
RETURN
SEND
I
lNpLn
I
/I
To Next Page
Loading...
