Zoom 9030 - Storing Patches from Edit Mode

Storing In the Edit mode
Store the Patch after you've completed editing.
Press the
STORE/EXECUTE key. The display changes as
shown
below.
88 ADVANCED PITCH2
139 ADVANCED PITCH2
Press the STORE/EXECUTE key so that the Patch whose
master level has been changed is stored
to the same Patch
number.
To store the Patch to a different Patch number, first press the
STORE/EXECUTE key then select the destination Patch
number with the
PATCH V/A keys. Press the
STORE/EXECUTE key again and the Patch will be stored to
the new Patch number.