Outline
of
the
Manual
Section I: Introduction
This section explains the terms used throughout the manual
and the names and functions of the panel conhnls and termi-
nals.
Section 11: Tutorial
This section is a "guided tour" of the 9030 that leads you
through the various functions and operations of the unit,
from making all the initial connections and setting up each
piece of equipment to storing your newly edited effect pro-
grams. Even if you have a lot of experience using multi-
effect devices, we recommend that you take some time to
look through this section.
Section Ill: Play Mode
This section explains in detail the operations of playing
selected effect programs of the 9030. If you wish to start
processing sounds
as
soon
as
possible, read this section after
the
Tutorial section.
Section IV: Edit Mode
This section explains the operations of the Edit mode,
in
which the Patches of the 9030 are edited. The parameters of
the basic effect programs are also explained in this section.
If
you wish to start editing your own effect programs, read
this section after the Tutorial section.
Section
V:
Utility Mode
and
Pop-up Menu
This section explains the remaining miscellaneous operations
of the 9030, such
as
naming of the effect programs, MIDI
operations
in
the Utility Mode, and the convenient pop-up
menu.
Section VI: Example Applications
--
Remote Control
and
Real-time Modulation
This section explains how to control the 9030 remotely by
using the optional 8050 foot controller and MIDI devices
such
as
a
synthesizer.
If
you are using the 9030 with a
MIDI
keyboard (or other MIDI device), you should read this sec-
tion to get the most out of your equipment.
To Next Page
Loading...
